|
|
Municipal Office with multi-purpose hall
Machová, Petra ; Krupica, Roman (referee) ; Bantová, Sylva (advisor)
The master´s thesis on the Municipal Office with a multipurpose hall is prepared as the project documentation for the construction. The building includes the municipal office, a tourist information centre, an area for the provision of limited postal services, a café and a multipurpose hall. The building complements the development of the square in the centre of Horní Maršov village. The building has an L-shaped plan, one underground and three above-ground floors. The multi-purpose hall is unbasement, one storey. The load-bearing system is designed as a wall system, partly reinforced concrete, monolithic in the underground floor and in the above-ground floors made of aerated concrete blocks. The ceiling structures are designed as monolithic reinforced concrete slabs and the multipurpose hall has a ceiling structure made of pre-stressed reinforced concrete panels. The roof structure of the main building is a two-layer flat roof with metal sheeting, and the multipurpose hall is covered with a flat roof with asphalt shingles.
|
|
|
Residential building in Valašské Meziříčí
Pasztorek, Martin ; Woytela, Jindřich (referee) ; Benešová, Romana (advisor)
This Bachelor thesis deals with a design of new building – apartment house. Designed apartment house is located in Zlin region, in the town Valasske Mezirici. Altogether, the designed bulding contains partial basement, eight dwelling units and four storeys. In the ground floor we can find a storage cellar, utility room and cleaning room. The ground floor is made of 3 single sections – office section, section with access to dwelling units with the pram room and section with driving school. These sections are separated from each other and each section has its own entrance. Dwelling units are located on the second floor, third floor and fourth floor. The second floor is made of small flats – there are 3 studios and 1 one-room flat. Larger flats are located on the third and fourth floor where we can find 2 two-bedroom flats and 2 three-bedroom flats. Every dwelling unit has a disposal of the loggie except the flats on the fourth floor – these have a disposal of the terrace located on a flat green roof. Apartment house is built from clay block and overhang part is made of precast frame elements. Building foundations consist of foundation strips. The columns that are erecting the overhang part are placed on foundation pads. The basement wall is built from concrete blocks. Ceiling construction is made of prestressed ceiling panels Spiroll. Staircase is reinforced concrete precast. Roofing is solved by flat green roof. Thermal insulation of the building is solved by external contact insulation system that is internationally labeled and known as ETICS. As a thermal isolator serves the expanded polystyrene.
|
|
|
Apartment building
Danielová, Marie ; Vystrčil, Jan (referee) ; Šuhajda, Karel (advisor)
The aim of the bachelor’s thesis is to processing of the design documentation for a newly-built apartment building. The apartment building is located in Havlíčkův Brod. The building has four above-ground floors and one basement. In the basement there are cellars, technical facilities, a common room, a bicycle room and a cleaning room. There are 8 residential units on the upper floors. The apartments on the ground floor are wheelchair accessible. The apartments on the second to fourth floor have their own balcony. On the second floor there is a common terrace. The apartment building is based on strip foundations made of plain concrete. External walls in the basement are made of calcium silicate blocks and the external walls of the above-ground floors are made of aerated concrete blocks. The floor structure is prefabricated structure, which is made of reinforced concrete beams and aerated concrete inserts. The roofing of the building is made of a vegetation single-skin flat roof. The building is insulated with the ETICS contact insulation system.
|
|
|
Sports Center
Krampla, Jan ; Havířová, Zdeňka (referee) ; Lavický, Miloš (advisor)
The subject of the masters thesis is the new construction of a object for sport which is located in sport area Dukla in Pardubice. The building has a basement with parking and one floor with sport hall and other parts. The object is covered with flat roof. In the background of the building there is reception with bufet, changing rooms, toilets, showers, saunas and cooling pool, massage room and Kneipp walk. The utility roon is located in the basement. Entrance to the building is on the west side where there is also parking lot with walk leading to entrance. The object is made of collumns made of reinforced concrete and slabs of the same material. The outer fasade of the object is made from ceramic blocks Porotherm and insulated with ETICS system with the width of 200 mm
|
|
|
Study of the ETICS surface resistance to biotic attack
Těžká, Adéla ; Žák,, Antonín (referee) ; Žižková, Nikol (advisor)
This diploma thesis deals with the study of resistance of ETICS surface treatments to biotic attack. The theoretical part elaborates a research focused on biotic attack of facades of buildings insulated by contact insulation systems ETICS. Based on the information obtained during the elaboration of the bachelor thesis and further study, the optimization methodology of ETICS surface treatment resistance to biotic attack proposed in 2018 is elaborated. In the practical part, the proposed methodology is verified, evaluated and recommendations concerning the suitability of using the proposed methodology in construction practice are implemented.
|
|
|
Retirement home
Kratochvíl, Jakub ; Spáčilová, Jitka (referee) ; Spáčil, Miroslav (advisor)
The topic of this thesis is a project documentation of a Retirement home located in Prague in Novodvorská street. The building is designed as a stand-alone building with five floors of a rectangular ground plan with a receding fifth storey. The retirement home is divided into a public section - a pharmacy and a part for clients - accommodation, leisure time including facilities - a restaurant with a kitchen, a laundry room. The construction system is designed as a reinforced concrete monolitic skeleton with rectanguplar columns and the filling structures are made of ceramic blocks. The building is based on reinforced concrete footings. A waterproof concrete is proposed for the lift shaft, and the foundation sills are designed for the perimeter masonry. Roofing of the 4th and 5th floor is a warm flat roof. In the 4th floor roofing section, the roof is made as a concrete tiles paving. The main entrance to the building is from southwest and the access to the building is from the northwest side where there is a parking lot for employees and clients.
|
|
|
Mixed-use building in the Slavkov complex
Milota, Martin ; Krupica, Roman (referee) ; Jelínek, Petr (advisor)
The building in a question is a new build mixed-use building. It is situated in industrial area of Slavkov u Brna and is intended for employees of this area. In the underground floor is situated collective garage for 18 personal automobiles. First floor is designed for retail sale. Specifically general store, boutique and cafe. In the second and third floor are accommodation units for area employees. Specifically 12 accommodation units. Building has a flat roof with asphalt strip coating. The load-bearing system of the building is designed as a reinforced concrete skeleton, THERM-type bricks are used for the construction while thermal comfort is achieved by a certified external thermal insulation composite system (ETICS) featuring façade polystyrene. There is parking space area in front of the building.
|
|
|
Study of energy consumption reduction of block of flats
Svoboda, Lukáš ; Šteffek, Libor (referee) ; Ostrý, Milan (advisor)
The goal of the thesis is firstly to get all the information about the initial state of solved block of flats, which is located on the street Merhautova 76/954 in Brno – Černá pole, in terms of constructions, energy consumption and initial state of heating system. In the second part of the thesis, where are discussed the possibilities of reduction of energy consumption, variant drafts of reduction of energy consumption and their financial costs and the choice of optimal variant. Third part deals with assement of solved block of flats in terms of sustainable built environment by using tool to rate buildings in terms of sustainable built environment - SBToolCZ, evaluation of possibility to use renewables. In the end are written summaries and recommendations.
|
|
|
The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation
Machová, Petra ; Kosová, Jaroslava (referee) ; Čech, Josef (advisor)
The topic of the diploma thesis „The impact of executing new thermal insulation on a apartment building on the expenses associated with its operation “ is a draft and appraisal of four variants of thermal insulation of the building. The thesis deals with the assessment of the current proposal for apartment building envelopes along with proposing alternative plans with emphasis on reducing heating costs. The first section describes the types of buildings according to heating demand and a list of different variants of thermal insulation materials. The second part is devoted to a specific apartment building in the Ústí nad Labem for which there are designed in four variants of insulation. The work includes thermal assessment in original condition and the assessment of new condition modified by adding thermal insulation. Through research will bedetermined price of implementation of proposed insulation options together with the costs of operation of the apartment building. In conclusion, the diploma thesis evaluates the payback period of insulation.
|
|
|
Medical center Hlinsko
Pilný, Ondřej ; Burianová, Lenka (referee) ; Kacálek, Petr (advisor)
This diploma thesis deals with the design and elaboration process of a project documentation of medical center in city Hlinsko. New building is situated in the northern part of the city in the area determined for constructions of public infrastructure. It´s a four-floor object with partial basement and slant mansard and flat vegetative roof.Object is based on foundation strips and footings made from reinforced concrete.The bearing and internal walls are designed from KALKSANDSTEIN lime sand blocks.The beams and collums are used in the placed designed with open disposition.The ceiling in 1.PP is designed as reinforced concrete for securing fire safety.The rest od ceiling constructions is designed from prestressed concrete panels SPIROLL,with exception in 4.NP,where the ceiling constructions are made from solid roof system YTONG KOMFORT,which is layed on frame system made of steel and reinforced concrete.The peripheral walls of 1.PP are made from lost formwork, which is insulated with extruded polystyrene.The walls in floors above ground are insulated with combination of external thermal insulation system (ETICS) and ventilated facade with CEMBRIT SOLID and PATINA facade cladding panels. The building is functionally divided into several part.Cafe, pharmacy, ambulance and medical center, each with it´s own entrance.Pharmacy is equipped with shop, medicine mixer and storage.Ambulance is equipped with garage slots, background for employees, room of crisis preparedness and operating center.Medical centrum is equipped with emergency, RTG, operating theater, rehabilitations and other types of examination rooms.Each examination room is equipped with waiting room.For more comfort the center has a background for employees.The whole object is designed with forced air exchange. Designed object is barrier-free.In front of the building is situated parking slots for cars, motorbikes and ambulances.Total number of slots is 74 places, which 5 is designed for disabled people.
|
guest ::
